SKB 3I-3026-15BC 30 x 26 x 15 Inches Audio Utility Case with Wheels and Cubed Foam
SKB 3I-3026-15BC 30 x 26 x 15 Inches Audio Utility Case with Wheels and Cubed Foam by SKB at Play Our Music. MPN: 3I-3026-15B-C. Hurry! Limited time offer. Offer valid only while supplies last. The 3I-3026-15BC Pro Audio Utility Case measures an impressive 30'' Long x 26'' Wide x 15'' Deep with layers of cubed foam for customization of your
The 3I-3026-15BC Pro Audio Utility Case measures an impressive 30" Long x 26" Wide x 15" Deep with layers of cubed foam for customization of your gear for added protection. The case is molded of ultra high-strength polypropylene copolymer resin, and features a gasketed, water and dust tight, submersible design (IP67) that is resistant to corrosion and impact damage, and an automatic ambient pressure equalization valve (MIL-STD-648C) to assist with moisture control. This iSeries size is yet another new size that is being produced on SKB's Energy Saving Hydraulic Toggle Injection Molding System at SKB's manufacturing facility in Orange, California. This injection system is one of the largest and most efficient injection molding systems in the United States. The 3I-3026-15BC Pro Audio Utility Case with cubed foam also features three protected hinges with stainless steel pins to provide lid stability, SKB's "trigger release" latch system can be retrofitted with TSA recognized and accepted locks, an oversized double grip carrying handle to balance a heavy load, and comfortable Oversized snap-down rubber over-molded cushion grip handles on each end for a two person carry or transport. The heavy-duty oversized handle and wide set double wheels offer the perfect solution to comfortable transport of pro audio gear, camera and video equipment, lenses and technical instruments.
Features & Highlights
- Cubed foam interior for customization
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
|Item Weight:||1.5 pounds|
|Item Size:||34 x 17.5 x 17.5 inches|
|Package Weight:||45.8 pounds|
|Package Size:||28.82 x 16.93 x 16.93 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by SKB, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
sku: MW-RAXER12, mpn: ER-12, ean: 0670429008323,
Go pro! Put that rackmounted gear where it belongs and turn your room with studio gear in it into a real studio space! How? Start with the ER-12 economy rack from Raxxess! This standalone rack cabinet houses up to 12U of gear, and its low-key, classy...
mpn: G-TOUR 4U, ean: 0716408504315,
ATA Wood Flight Rack Case; 4U; 17" Deep9mm plywood construction with PVC exterior. Red recessed twist latches and spring-loaded rubber-gripped handles. Heavy-duty commercial grade plated hardware and reinforced stackable ball corners. 3.2mm thick fro...
mpn: 1SKB-SCPS2, ean: 0789270995451,
Another soft case to transport and protect your powered speaker. A rigid plywood core that is covered by a rugged 600 Denier exterior for protection to the knobs and delicate controls. An indestructible injection molded pull out handle and dual wheel...
mpn: G-TOUR 12U CAST, ean: 0716408504308,
ATA Wood Flight Rack Case; 12U; 17" Deep; w/ Casters9mm plywood construction with PVC exterior. Red recessed twist latches and spring-loaded rubber-gripped handles. Heavy-duty commercial grade plated hardware and reinforced stackable ball corners. 3....
mpn: 3SKB-R06U20W, ean: 0789270090644,
The Rolling Shockmount Case series incorporates our black powder coated twist latches with locking loops and low profile injection molded pull handle. The molded design provides extra stiffness in the lids and sides while also allowing the racks to s...
By Seismic Audio
mpn: AR 10.2, ean: 0812451011821,
10 Space Rack Case with Casters - Model # SAR10.2 , 10 Space Rack with 4" Casters , Standard 19" Mounting Rail Width , Outer Dimensions with Doors On: , Height: 25 1/4" w/Casters - 19" Without , Width: 21" - Depth: 26" , Inside Dimensions: , Rail to ...
mpn: 3I-1813-5MPCL, ean: 0789270100596,
Featuring high quality form-cut PE foam designed specifically to house the Akai MPC live sampler/sequencer, the 3i1813-5MPCL provides the maximum protection in transporting the stand-alone sampler/sequencer. All SKB iSeries injection molded mil-stand...
mpn: 1SKB-R8U, ean: 0789270995314,
The re-designed Roto-molded Rack Cases meet the needs of musicians and pro audio engineers. The new Roto Racks include a gasketed full front and rear covers for easy access. These re-designed Roto Racks have a new exterior design that includes a reco...
By Allen & Heath
mpn: AH-AB-168, ean: 6938122241381,
Allen & Heath's AB168 is a portable remote AudioRack for use with the Allen & Heath GLD and Qu series in live and installation settings. Featuring 16 mic preamps with phantom power indicators and 8 XLR line outs, AB168 runs on Allen & Heath's proprie...
mpn: KD12U, ean: 0823951108454,
OSP Deluxe Studio Racks are the perfect solution for permanent installs where front/rear lids are not required. The TAC line of racks are intended for applications where rack movement is rare, while the KD variants are equipped with side handles and ...